2000 Physical Properties

The design of the Hydraway 2000 allows for high compressive strength with the fastest in-flow rate available on the market today.


Hydraway 2000 Physical Properties

ProductTest MethodTypical Value
Compressive StrengthASTM D-695/1621111,400 PSF
Flow Rate At 1,500 PSFASTM D-47162221 GPM/ft-width
Peel Strength3ASTM D-187650 lbs/ft-width
Fabric (4.5 oz.)
ElongationASTM D-4632-9150%
Grab TensileASTM D-4632-91120 lbs
Puncture StrengthASTM D-4833-0065 lbs
Mullen Burst StrengthASTM D-3756-87225 psi
Trapezoidal TearASTM D-4533-9150 lbs
Wide width TensileASTM D-459550 lbs/in
UV Resistance (500 hours)ASTM D-4355-0270%
PermitivityASTM D-4491-99A1.8 sec
PermeabilityASTM D-4751-99A4.21 cm/sec
Flow RateASTM D-4491135 gal/min/ft24
AOS (EOS)ASTM D-4751-99A70 US Standard Sieve
Roll Dimensions
Width6, 12, 18, or 24 inches – Other sizes available upon request
Length150 feet – up to 550′ available upon request
1. Modified – an existing ASTM test was modified since a recognized test method had not been established for this type of product at time of testing.
2. Gradient of 0.1
3. Fabric to core
4. Values shown are in weaker principal direction. Minimum average roll values are calculated as the typical minus two standard deviations. Statistically, it yields a 97.7% degree of confidence that any samples taken from quality assurance testing will exceed the value reported.

For dimensions of Hydraway 2000, please see this PDF.